Optimizing industrial transport with a connected automated vehicle demonstrator for assembly systems and end-of-line production.

In recent years, the automotive industry has witnessed significant progress in the development of automated driving technologies. The integration of advanced sensors and systems in vehicles has led to the emergence of various functionalities, such as driving assistance and autonomous driving. Applying these technologies on the assembly line can enhance the efficiency, safety, and speed of transportation, especially at end-of-line production. This work presents a connected automated vehicle (CAV) demonstrator for generating autonomous driving systems and services for the automotive industry. Our prototype electric vehicle is equipped with state-of-the-art sensors and systems for perception, localization, navigation, and control. We tested various algorithms and tools for transforming the vehicle into a self-driving platform, and the prototype was simulated and tested in an industrial environment as proof of concept for integration into assembly systems and end-of-line transport. Our results show the successful integration of self-driving vehicle platforms in the automotive industry, particularly in factory halls. We demonstrate the localization, navigation, and communication capabilities of our prototype in a demo area. This work anticipates a significant increase in efficiency and operating cost reduction in vehicle manufacturing, despite challenges such as current low traveling speeds and high equipment costs. Ongoing research aims to enhance safety for higher vehicle speeds, making it a more viable business case for manufacturers, considering the increasing standardization of automated driving equipment in cars. The main contribution of this paper lies in introducing the general concept architecture of the integration of automated driving functionalities in end-of-line assembly and production systems. Showing a case study of the effective development and implementation of such functionalities with a CAV demonstrator in a more standardized industrial operational design domain.

Forcing vine regrowth under different irrigation strategies: effect on polyphenolic composition and chromatic characteristics of cv. Tempranillo wines grown in a semiarid climate.

One of the effects of climate change in warm areas is the asynchrony between the dates of the technological and the phenolic maturity of grapes. This is important because the quality and color stability of red wines are directly related to the content and distribution of phenolic compounds. A novel alternative that has been proposed to delay grape ripening and make it coincide with a seasonal period more favorable for the formation of phenolic compounds is crop forcing. This consists of severe green pruning after flowering, when the buds of the following year have already differentiated. In this way, the buds formed during the same season are forced to sprout, initiating a new delayed cycle. The aim of the present work is to study the effect on the phenolic composition and color of wines elaborated from vines fully irrigated (C), grown using conventional non-forcing (NF) and forcing (F) techniques (C-NF and C-F), and wines from vines subjected to regulated irrigation (RI), grown using NF and F techniques (RI-NF and RI-F). The trial was carried out in an experimental vineyard of the Tempranillo variety located in a semi-arid area (Badajoz, Spain) in the 2017-2019 seasons. The wines (four by treatment) were elaborated and stabilized according to the classic methodologies for red wine. All wines had the same alcohol content, and malolactic fermentation was not carried out in any of them. Anthocyanin profiles were analyzed by HPLC, and total polyphenolic content, anthocyanin content, catechin content, the contribution to color due to co-pigmented anthocyanins, and various chromatic parameters were also determined. Although a significant effect of year was found for almost all the parameters analyzed, a general increasing trend in F wines was found for most of them. The anthocyanin profile of F wines was found to differ from that of C wines, especially in delphinidin, cyanidin, petunidin, and peonidin content. These results indicate that by using the forcing technique it was possible to increase the polyphenolic content by ensuring that the synthesis and accumulation of these substances occurred at more suitable temperatures.

Investigations on the Role of Iron (III) and Silica-Iron (III) for DNA Protection Against Highly Intense UV Radiation: Tracking the Connection of Prebiotic Chemistry to Biology.

The mineral reaction pathways that yield organic compounds of increasing complexity would have required a means of protective screening against strong ultraviolet radiation for macromolecular assembly on early Earth. In this study, a bacterial chromosomal plasmid DNA was used as a model biomolecule that represents a complex polymeric nucleic acid containing genetic information. The plasmid DNA was exposed to UV radiation through a medium containing air, water, iron (Fe3+), or silica-iron rich aqueous solutions. Our results demonstrate that the plasmid DNA underwent covalent breakage in an aqueous solution when exposed to UV radiation but was shielded against damage due to the presence of iron and silica. It is demonstrated that a suspension of ca. 40 nm colloidal particles of silica gel embedded with Fe3+ ions adsorbed on silanol groups that formed nanoclusters of noncrystalline iron hydroxide is an extremely efficient shelter against intense UV radiation. The implications for our understanding of primitive Earth and Earth-like planets, moons, and asteroids are discussed. The stability of a chromosomal DNA molecule against UV radiation in the presence of iron and silica may provide support on how macromolecules endured early Earth environments and brought forth important implications on early molecular survival against UV radiation.

Predictors of Septic Shock or Bacteremia in Children Experiencing Febrile Neutropenia Post-Chemotherapy.

BACKGROUND: Febrile neutropenia (FN) is an early indicator of infection in oncology patients post-chemotherapy. We aimed to determine clinical predictors of septic shock and/or bacteremia in pediatric cancer patients experiencing FN and to create a model that classifies patients as low-risk for these outcomes. METHODS: This is a retrospective analysis with clinical data of a cohort of pediatric oncology patients admitted during July 2015 to September 2017 with FN. One FN episode per patient was randomly selected. Statistical analyses include distribution analysis, hypothesis testing, and multivariate logistic regression to determine clinical feature association with outcomes. RESULTS: A total of 865 episodes of FN occurred in 429 subjects. In the 404 sampled episodes that were analyzed, 20.8% experienced outcomes of septic shock and/or bacteremia. Gram-negative bacteria count for 70% of bacteremias. Features with statistically significant influence in predicting these outcomes were hematological malignancy (P < .001), cancer relapse (P = .011), platelet count (P = .004), and age (P = .023). The multivariate logistic regression model achieves AUROC = 0.66 (95% CI 0.56-0.76). The optimal classification threshold achieves sensitivity = 0.96, specificity = 0.33, PPV = 0.40, and NPV = 0.95. CONCLUSIONS: This model, based on simple clinical variables, can be used to identify patients at low-risk of septic shock and/or bacteremia. The model's NPV of 95% satisfies the priority to avoid discharging patients at high-risk for adverse infection outcomes. The model will require further validation on a prospective population.

Methanolysis of Poly(lactic Acid) Using Catalyst Mixtures and the Kinetics of Methyl Lactate Production.

Polylactic acid (PLA) is a leading bioplastic of which the market share is predicted to increase in the future; its growing production capacity means its end-of-life treatment is becoming increasingly important. One beneficial disposal route for PLA is its chemical recycling via alcoholysis. The alcoholysis of PLA leads to the generation of value-added products alkyl lactates; this route also has potential for a circular economy. In this work, PLA was chemically recycled via methanolysis to generate methyl lactate (MeLa). Four commercially available catalysts were investigated: zinc acetate dihydrate (Zn(OAc)2), magnesium acetate tetrahydrate (Mg(OAc)2), 4-(dimethylamino)pyridine (DMAP), and triazabicyclodecene (TBD). Dual catalyst experiments displayed an increase in reactivity when Zn(OAc)2 was paired with TBD or DMAP, or when Mg(OAc)2 was paired with TBD. Zn(OAc)2 coupled with TBD displayed the greatest reactivity. Out of the single catalyst reactions, Zn(OAc)2 exhibited the highest activity: a higher mol% was found to increase reaction rate but plateaued at 4 mol%, and a higher equivalent of methanol was found to increase the reaction rate, but plateaued at 17 equivalents. PLA methanolysis was modelled as a two-step reversible reaction; the activation energies were estimated at: Ea1 = 25.23 kJ∙mol-1, Ea2 = 34.16 kJ∙mol-1 and Ea-2 = 47.93 kJ∙mol-1.

A dominant function of LynB kinase in preventing autoimmunity.

Here, we report that the LynB splice variant of the Src-family kinase Lyn exerts a dominant immunosuppressive function in vivo, whereas the LynA isoform is uniquely required to restrain autoimmunity in female mice. We used CRISPR-Cas9 gene editing to constrain lyn splicing and expression, generating single-isoform LynA knockout (LynAKO) or LynBKO mice. Autoimmune disease in total LynKO mice is characterized by production of antinuclear antibodies, glomerulonephritis, impaired B cell development, and overabundance of activated B cells and proinflammatory myeloid cells. Expression of LynA or LynB alone uncoupled the developmental phenotype from the autoimmune disease: B cell transitional populations were restored, but myeloid cells and differentiated B cells were dysregulated. These changes were isoform-specific, sexually dimorphic, and distinct from the complete LynKO. Despite the apparent differences in disease etiology and penetrance, loss of either LynA or LynB had the potential to induce severe autoimmune disease with parallels to human systemic lupus erythematosus (SLE).

Experimental data of cathodes manufactured in a convective dryer at the pilot-plant scale, and charge and discharge capacities of half-coin lithium-ion cells.

Megtec Systems pilot-plant scale continuous convective coater. The data was generated as part of an experimental design involving the following coating-drying process variables and ranges: comma bar gap, 80-140 µm; web speed, 0.5-1.5 m/min; coating ratio, 110-150%; drying temperature, 85-110 °C and drying air speed, 5-15 m/s. The manufacturing data include pre-calendered coating thickness, mass loading dry and wet, pre-calendered porosity, spatial autocorrelation and join counting (SAJC) Z-score for carbon and for fluorine, cell thickness, coating weight and porosity of 15 different electrode coatings and 45 half-coin cells. The electrochemical data was obtained at 25 °C in a Maccor 4000 series battery cycler and consists of charge and discharge capacities at C/20, C/5, C/2, 1C, 2C, 5C and 10C C-rates. Discharge gravimetric and volumetric capacities, rate performance (at 5C:0.2C) and first cycle loss data is also reported. Details of the experimental design and a comprehensive analysis of the data can be found in the co-submitted manuscript (Román-Ramírez et al., 2021). Additional collected data not used in Román-Ramírez et al. (2021) is reported in the present manuscript and include visual observations of coating defects, rheological properties of the electrode slurries (solid content, viscosity, coating shear rate and viscosity at coating shear rate), room temperature and room humidity during the coatings and first cycle loss of the coin cells. Raw and analyzed data is made available. The reported data can be used to extend the analysis reported in Román-Ramírez et al. (2021), and for the comparison of relevant data obtained at different manufacturing scales.

Visualizing Street Pavement Anomalies through Fog Computing V2I Networks and Machine Learning.

Analyzing data related to the conditions of city streets and avenues could help to make better decisions about public spending on mobility. Generally, streets and avenues are fixed as soon as they have a citizen report or when a major incident occurs. However, it is uncommon for cities to have real-time reactive systems that detect the different problems they have to fix on the pavement. This work proposes a solution to detect anomalies in streets through state analysis using sensors within the vehicles that travel daily and connecting them to a fog-computing architecture on a V2I network. The system detects and classifies the main road problems or abnormal conditions in streets and avenues using Machine Learning Algorithms (MLA), comparing roughness against a flat reference. An instrumented vehicle obtained the reference through accelerometry sensors and then sent the data through a mid-range communication system. With these data, the system compared an Artificial Neural Network (supervised MLA) and a K-Nearest Neighbor (Supervised MLA) to select the best option to handle the acquired data. This system makes it desirable to visualize the streets' quality and map the areas with the most significant anomalies.

Antibiofilm Action of Plant Terpenes in Salmonella Strains: Potential Inhibitors of the Synthesis of Extracellular Polymeric Substances.

Salmonella can form biofilms that contribute to its resistance in food processing environments. Biofilms are a dense population of cells that adhere to the surface, creating a matrix composed of extracellular polymeric substances (EPS) consisting mainly of polysaccharides, proteins, and eDNA. Remarkably, the secreted substances, including cellulose, curli, and colanic acid, act as protective barriers for Salmonella and contribute to its resistance and persistence when exposed to disinfectants. Conventional treatments are mostly ineffective in controlling this problem; therefore, exploring anti-biofilm molecules that minimize and eradicate Salmonella biofilms is required. The evidence indicated that terpenes effectively reduce biofilms and affect their three-dimensional structure due to the decrease in the content of EPS. Specifically, in the case of Salmonella, cellulose is an essential component in their biofilms, and its control could be through the inhibition of glycosyltransferase, the enzyme that synthesizes this polymer. The inhibition of polymeric substances secreted by Salmonella during biofilm development could be considered a target to reduce its resistance to disinfectants, and terpenes can be regarded as inhibitors of this process. However, more studies are needed to evaluate the effectiveness of these compounds against Salmonella enzymes that produce extracellular polymeric substances.

X-ray Characterization of Conformational Changes of Human Apo- and Holo-Transferrin.

Human serum transferrin (Tf) is a bilobed glycoprotein whose function is to transport iron through receptor-mediated endocytosis. The mechanism for iron release is pH-dependent and involves conformational changes in the protein, thus making it an attractive system for possible biomedical applications. In this contribution, two powerful X-ray techniques, namely Macromolecular X-ray Crystallography (MX) and Small Angle X-ray Scattering (SAXS), were used to study the conformational changes of iron-free (apo) and iron-loaded (holo) transferrin in crystal and solution states, respectively, at three different pH values of physiological relevance. A crystallographic model of glycosylated apo-Tf was obtained at 3.0 Å resolution, which did not resolve further despite many efforts to improve crystal quality. In the solution, apo-Tf remained mostly globular in all the pH conditions tested; however, the co-existence of closed, partially open, and open conformations was observed for holo-Tf, which showed a more elongated and flexible shape overall.

Ingesta de proyectil de aire comprimido asociado a apendicitis aguda perforada / Ingested air rifle pellet associated with acute perforated appendicitis

RESUMEN Se informa el caso de un paciente masculino de 28 años de edad, con antecedente de ingesta volun taria de proyectil metálico 20 días antes de la consulta, que es admitido en nuestro Servicio con sinto matología típica de apendicitis aguda. En ese contexto se practica una apendicectomía convencional. El análisis de las imágenes preoperatorias y los hallazgos quirúrgicos permiten identificar la asociación entre el cuerpo extraño y la apendicitis aguda. La ingesta de cuerpo extraño, sea voluntario o acciden tal, representa una causa sumamente infrecuente de apendicitis aguda, razón por la cual existen pocos informes al respecto en la literatura mundial; este es el primero en la Argentina.

ABSTRACT We report the case of a 28-year-old male patient with a history of voluntary ingestion of a metallic pellet 20 days before who was transferred to our department with typical symptoms of acute ap pendicitis. Under that circumstances he underwent conventional appendectomy. The analysis of the preoperative imaging tests and the intraoperative findings help to identify the association between the foreign body and acute appendicitis. Ingestion of foreign bodies, either accidental or voluntary, is an extremely uncommon cause of acute appendicitis; thus, there are few reports in the international literature. This is the first case reported in Argentina.

Comparative Study on the Hydrogenation of Naphthalene over Both Al2O3-Supported Pd and NiMo Catalysts against a Novel LDH-Derived Ni-MMO-Supported Mo Catalyst.

Naphthalene hydrogenation was studied over a novel Ni-Al-layered double hydroxide-derived Mo-doped mixed metal oxide (Mo-MMO), contrasted against bifunctional NiMo/Al2O3, and Pd-doped Al2O3 catalysts, the latter of which with Pd loadings of 1, 2, and 5 wt %. Reaction rate constants were derived from a pseudo-first-order kinetic pathway describing a two-step hydrogenation pathway to tetralin (k 1) and decalin (k 2). The Mo-MMO catalyst achieved comparable reaction rates to Pd2%/Al2O3 at double concentration. When using Pd5%/Al2O3, tetralin hydrogenation was favored over naphthalene hydrogenation culminating in a k 2 value of 0.224 compared to a k 1 value of 0.069. Ni- and Mo-based catalysts produced the most significant cis-decalin production, with Mo-MMO culminating at a cis/trans ratio of 0.62 as well as providing enhanced activity in naphthalene hydrogenation compared to NiMo/Al2O3. Consequently, Mo-MMO presents an opportunity to generate more alkyl naphthenes in subsequent hydrodecyclization reactions and therefore a higher cetane number in transport fuels. This is contrasted by a preferential production of trans-decalin observed when using all of the Al2O3-supported Pd catalysts, as a result of octalin intermediate orientations on the catalyst surface as a function of the electronic properties of Pd catalysts.

Chemical Degradation of End-of-Life Poly(lactic acid) into Methyl Lactate by a Zn(II) Complex.

The catalyzed methanolysis of end-of-life poly(lactic acid) (PLA) products by an ethylenediamine Zn(II) complex to form biodegradable methyl lactate was studied experimentally at 70, 90, and 110 °C. The PLA samples consisted of typical consumer waste materials, including a cup, a toy, and a three-dimensional (3D) printing material. High selectivities and yields (>94%) were possible depending on temperature and reaction time. Additionally, and to develop a predictive kinetic model, kinetic parameters (pre-exponential factor and activation energies) of the PLA transesterification reaction were first obtained from virgin PLA. These parameters were subsequently used to estimate the conversion of PLA, selectivity, and yield of methyl lactate after 1 and 4 h of the reaction, and the results were compared with the experimental values of the end-of-life PLA. Despite the presence of unknown additives in the PLA waste material and uncontrolled particle size, the model was able to predict the overall conversion, selectivity, and yield to an average deviation of 5, 7, and 12%, respectively. A greater agreement between the model and experimental values is observed for the higher temperatures and the longer reaction time. Larger deviations were observed for the PLA toy, which we attribute to the presence of additives, since despite its lower molecular weight, it possessed a higher structural strength.

Kinetics of Methyl Lactate Formation from the Transesterification of Polylactic Acid Catalyzed by Zn(II) Complexes.

The kinetics of the transesterification of polylactic acid (PLA) with methanol to form methyl lactate catalyzed by Zn(II) complexes was studied experimentally and numerically. The complexes, Zn(1 Et )2 and Zn(2 Pr )2, were synthesized from ethylenediamine and propylenediamine Schiff bases, respectively. The temperature range covered was 313.2-383.2 K. An increase in the reaction rate with the increase in temperature was observed for the Zn(1 Et )2-catalyzed reaction. The temperature relationship of the rate coefficients can be explained by a linear Arrhenius dependency with constant activation energy. The kinetics of Zn(2 Pr )2, on the other hand, is only explained by non-Arrhenius kinetics with convex variable activation energy, resulting in faster methyl lactate production rates at 323.2 and 343.2 K. The formation of a new catalyst species, likely through reaction with protic reagents, appears to promote the formation of intermediate complexes, resulting in the nonlinear behavior. Stirring speed induced the stability of the intermediate complexes. Contrary to Zn(1 Et )2, Zn(2 Pr )2 was susceptible to the presence of air/moisture in solution. The kinetic parameters were obtained by fitting the experimental data to the mass and energy balance of a consecutive second step reversible reaction taking place in a jacketed stirred batch reactor. For the case of Zn(2 Pr )2, the activation energy was fitted to a four-parameter equation. The kinetic parameters presented in this work are valuable for the design of processes involving the chemical recycling of PLA into green solvents.

Inhibition of Glucosyltransferase Activity and Glucan Production as an Antibiofilm Mechanism of Lemongrass Essential Oil against Escherichia coli O157:H7.

The resistance of Escherichia coli O157:H7 to disinfection is associated with its ability to form biofilms, mainly constituted by glucans produced by glucosyltransferases. Citral and geraniol, terpenes found in the essential oil of Cymbopogon citratus (EO), have proven antibacterial activity against planktonic E. coli; however, no information was found about their efficacy and mode of action against E. coli biofilms. Therefore, the inhibitory effect of C. citratus EO, citral, and geraniol on glucans production and glucosyltransferase activity as anti-biofilm mechanism against E. coli was evaluated. EO, citral, and geraniol inhibited the planktonic growth of E. coli (minimal inhibitory concentration or MIC= 2.2, 1.0, and 3.0 mg/mL, respectively) and the bacterial adhesion (2.0, 2.0, and 4.0 mg/mL, respectively) on stainless steel. All compounds decreased the glucans production; citral and geraniol acted as uncompetitive inhibitors of glucosyltransferase activity (The half maximal inhibitory concentrations or IC50 were 8.5 and 6.5 µM, respectively). The evidence collected by docking analysis indicated that both terpenes could interact with the helix finger of the glucosyltransferase responsible for the polymer production. In conclusion, C. citratus EO, citral, and geraniol inhibited glucosyltransferase activity, glucans production, and the consequent biofilm formation of E. coli O157:H7.

Zinc Complexes for PLA Formation and Chemical Recycling: Towards a Circular Economy.

A series of ZnII complexes, based on propylenediamine Schiff bases, have been prepared and fully characterized. X-ray crystallography and NMR spectroscopy identified significant differences in the solid and solution state for the ZnII species. All complexes have been applied to the ring-opening polymerization of l-lactide with emphasis on industrial conditions. High conversion and good molecular weight control were generally achievable for Zn(A-D)2 , and high-molecular-weight poly(lactic acid) (PLA) was prepared in 1 min at a 10 000:1:33 [lactide]/[Zn]/[BnOH] loading. The more active ZnII catalysts were also applied to PLA degradation to alkyl lactate under mild conditions. Zn(A-B)2 demonstrated high activity and selectivity in this process with PLA being consumed within 1 h at 50 °C. Zn(C-D)2 were shown to be less active, and these observations can be related to the catalysts' structure and the degradation mechanism. Initial results for the degradation of poly(ethylene terephthalate) and mixed feeds are also presented, highlighting the broader applicability of the systems presented.

Active behaviour during early development shapes glucocorticoid reactivity.

Glucocorticoids are the final effectors of the stress axis, with numerous targets in the central nervous system and the periphery. They are essential for adaptation, yet currently it is unclear how early life events program the glucocorticoid response to stress. Here we provide evidence that involuntary swimming at early developmental stages can reconfigure the cortisol response to homotypic and heterotypic stress in larval zebrafish (Danio rerio), also reducing startle reactivity and increasing spontaneous activity as well as energy efficiency during active behaviour. Collectively, these data identify a role of the genetically malleable zebrafish for linking early life stress with glucocorticoid function in later life.

Catalase but not vitamin D receptor gene polymorphisms are associated with nonsegmental vitiligo in Northwestern Mexicans.

BACKGROUND: Vitiligo is an acquired pigmentation disorder characterized by melanocyte loss via autoimmune mechanisms triggered by oxidative stress. Gene polymorphisms in antioxidant enzymes and immunomodulators such as catalase (CAT) and vitamin D receptor (VDR), respectively, have been linked to vitiligo in European and Asian populations. Our aim was to evaluate the role of CAT and VDR gene polymorphisms as well as CAT and vitamin D in nonsegmental vitiligo in Northwestern Mexicans. METHODS: A total of 357 subjects, 173 nonsegmental vitiligo patients and 184 age-gender matched healthy controls, were genotyped by PCR-restriction fragment length polymorphism. CAT activity was determined in 39 patients and in 39 controls and vitamin D (VitD) levels in 35 individuals per group. RESULTS: CAT 419 C/T gene polymorphism was not informative, -89 A/T was associated with risk (P = 0.02), and 389 C/T conferred protection against vitiligo along with AT haplotype (P < 0.01 in both cases). VDR BsmI, ApaI, and TaqI gene polymorphisms were not associated with vitiligo, but BsmI was more prevalent in patients with Koebner phenomenon (P = 0.02). Serum CAT activity and VitD levels were lower in patients than in controls, but they showed no association with any vitiligo clinical characteristics neither with their gene polymorphisms. CONCLUSIONS: Our results suggest a role for CAT gene polymorphisms in vitiligo susceptibility in the Mexican population and a lack of association with VDR gene polymorphisms.

Combination of Cymbopogon citratus and Allium cepa essential oils increased antibacterial activity in leafy vegetables.

BACKGROUND: Cymbopogon citratus and Allium cepa essential oils (EOs) are rich in terpenes and sulfur compounds respectively, both with antibacterial activity and different cell targets, supporting the idea that their combination can increase their efficacy. RESULTS: Major constituents of C. citratus were geranial and neral, while A. cepa presented dipropyl disulfide and dipropyl trisulfide. Cymbopogon citratus and A. cepa EOs inhibited the in vitro growth of Escherichia coli O157:H7 (minimal inhibitory concentrations of 2.21 and 5.13 g L-1 respectively), Salmonella Choleraesuis (3.04 and 1.28 g L-1 ), Listeria monocytogenes (1.33 and 2.56 g L-1 ) and Staphylococcus aureus (0.44 and 5.26 g L-1 ). Application of the EO combination to spinach caused a greater reduction in E. coli (2.34 log colony-forming units (CFU) g-1 ), S. Choleraesuis (2.94 log CFU g-1 ), L. monocytogenes (2.06 log CFU g-1 ) and S. aureus (1.37 log CFU g-1 ) compared with higher doses of individual EOs; a similar effect was observed for romaine lettuce. Individual and combined EOs caused a reduction in flavor acceptability level; however, no significant differences were found among odor acceptability of control vegetables and those treated with the EO combination and C. citratus EO. CONCLUSION: Leafy vegetables treated with the EO combination showed higher antibacterial protection and odor acceptability compared with individual EO treatments. © 2016 Society of Chemical Industry.

Oregano (Lippia graveolens) essential oil added within pectin edible coatings prevents fungal decay and increases the antioxidant capacity of treated tomatoes.

BACKGROUND: Tomato is a fruit widely consumed due to its flavor and nutritional value; however, it is susceptible to fungi contamination. Oregano essential oil (OEO) is a fungicide whose constituents are volatile; therefore, their incorporation within edible coatings can protect them and maintain their efficacy. In this context, this study evaluated the effect of OEO applied within pectin coatings on the inhibition of Alternaria alternata growth, antioxidant content and sensorial acceptability of tomatoes. RESULTS: The major volatile compounds of OEO were carvacrol (47.41%), p-cymene (26.44%) and thymol (3.02%). All the applied OEO concentrations (15.7, 25.9 and 36.1 g L(-1) ) inhibited the in vitro growth of A. alternata, whereas the in vivo effective concentrations were 25.9 and 36.1 g L(-1) . Additionally, there was an increment of total phenols and antioxidant activity in coated tomatoes compared to controls. Aroma acceptability of tomatoes was not affected by the pectin-OEO coating; additionally, the pectin, pectin-OEO 15.7 g L(-1) treatments and control tomatoes showed higher flavor acceptability than those coated with pectin-OEO 25.9 and 36.1 g L(-1) . CONCLUSION: Pectin-OEO coatings showed antifungal effect and increased the antioxidant activity without negative effects on the sensorial acceptability of tomatoes. © 2015 Society of Chemical Industry.